DWR:: Step 3: Removing the Paper Templates & Sewing Corner Squares

Sunday, June 11, 2017

Follow along as I make Free Spirit Fabric's Double Wedding Ring Quilt.

DWR:: Removing the paper templates

This is a pretty simple process, removing the fabric arcs from their paper templates, but it's also easy to put too much stress on the seams and rip apart the fabric. So this is what I do.

  1. Fold first paper rectangle over, along seam
    1. Fold first paper rectangle over, along seam
  2. Fold back, and carefully pull at seam perforation. Hold down seam if necessary.
    2. Fold back, and carefully pull at seam perforation. Hold down seam if necessary.
  3. Pull until paper rectangle is removed
    3. Pull until paper rectangle is removed
  4. Repeat for remaining rectangles.
    4. Repeat Steps 1-3 for remaining rectangles.

Repeat Steps 1-3 for remaining rectangles
Paper templates in the recycling
Finished fabric arcs


Sew Corner Squares to Half the Arcs

You should have 40* 2.5" squares of fabric in one color, and another 40* 2.5" squares in another color. My squares are a darker teal and a goldenrod color.

  1. For one quarter of the arcs (i.e., 20), you need to sew a square in the first square color to either end of the arc. Then do the same with the other color of square for another 20 arcs. So half the arcs should now have squares on either side.
    DWR:: Sew corner squares on either side of 40 arcs (2 sets of 20)

Arcs ready for sewing
Arcs ready for sewing

0 comments: